End Closing Machines- Tube Forming and Bending

Equipment and Tooling for the Forming of Thin-Walled Tubing

Call us at:

(479) 751-2818
1764 Turnbow Street
Springdale, Arkansas 72764

info@carsonengineering.com

END CLOSING MACHINE

MODEL TRC-1 TUBE END CLOSER

Model TRC-1 is a machine for closing the ends of thin-walled copper, aluminum or steel tubes. The tube is clamped in a set of holding jaws and held stationary during closing which allows for processing of tubes that are pre-bent or punched. This “cold” process produces a flat end close of superior strength.

FEATURES AND SPECIFICATIONS FOR MODEL #TRC-1 END CLOSER

Range in tube sizes 1/4” to 1 3/8” O.D.
Flat end close rather than dome type, resulting in minimal tube loss
Simple quick-change tooling schematic
Process does not heat the tube
Roller tools and clamp jaws constructed from hardened tool steel
Machine footprint is 8’ x 10’ with the operator, height is 72”
Requires compressed air 80-100 PSI, 1.5CFM, electrical power 3 phase, 60 hertz
Standard colors are Carson Green and Safety Blue